10
English
GETTING STARTED
SENDING A CALL
RECEIVING A CALL
MONITORING
It is important to monitor traffic before
transmitting to ensure that you do not “talk
over” someone who is already transmitting.
1
Tu rn your radio on.
2
Select the desired channel.
3
Hold the microphone vertically 1 to 2 inches
(2.5 to 5 cm) from your mouth. Press the
PTT
button to talk; release it to listen.
1
Tu rn your radio on.
2
Adjust the radio’s volume, if necessary (see
page 9).
3
Select the desired channel.
4
To respond, hold the microphone vertically 1
to 2 inches (2.5 to 5 cm) from your mouth.
Press the
PTT
button to talk; release it to lis-
ten.
1
A short press of the preprogrammed
Monitor
button places the radio in Sticky Permanent
Monitor mode.
•You hear a high-pitched tone.
A short press of the
Monitor
button cancels
Sticky Permanent Monitor mode and returns
the radio to normal operation.
3
To place the radio in open squelch mode,
press and hold the preprogrammed
Monitor
button until you hear a high-pitched tone.
4
Momentarily press the
Monitor
button to
return to normal operation.
#English.book Page 10 Friday, April 18, 2003 2:22 PM
To Next Page
Loading...
