Phone
20
English
PHONE
Sending the Phone Number
After the access code is sent, you should wait
for a dialing tone before sending your phone
number.
You can send
• a phone number that is stored in the
radio, or
• a new number (for radios with keypad
only).
Additionally, depending on how your radio is
programmed, if you use the keypad to send a
number, the radio can send the numbers in one
of the following ways:
• live dial
• buffered dial.
Check with your dealer for details.
Sending a Stored Phone Number
You can access the stored phone numbers by
• recalling the last number dialed,
• using the speed dial feature.
Automatic
Immediate
You do not have to do anything;
the radio immediately sends the
access code when it enters phone
mode.
Method
Used
Steps to Take
Method
Used
Steps to Take
Last
Number
Redial
*
Press and release the PTT again;
the radio sends the last number
dialed.
#WarisPopUser.book Page 20 27, May 1998, 2:06 PM
To Next Page
Loading...
