PHONE
31
Phone
English
Sending a New Number (for radios
with keypad only)
You enter the phone number by pressing the
relevant keys on the keypad.
The Phone Conversation
Once the radio has connected to the intended
party, you can begin the conversation. Even
though this is a phone call, your conversation
mimics a radio call (that is, both parties speak in
turn).
NOTE: The radio starts a programmable Time-Out-
Timer the moment both parties stop transmitting
(talking). If the Time-Out-Timer expires, the radio
will end the phone call.
Speed
Dial
à
1. Press and release the pro-
grammed Speed Dial button.
2. Press the numbered keys
(1-9) corresponding to the Þrst
nine phone numbers in the
phone list. Press Ò0Ó if you want
the last number dialed.
3. If your radio uses buffered dial,
press and release the PTT.
4. The radio sends out the phone
number.
*
The method described is not applicable for radios which
manually send the access code; these radios can access
this number from the phone list or the speed dial.
For radios that manually send the access code, press the
Down Key once to access the last number dialed.
à
For radios with keypad only.
Method Steps to Take Method Steps to Take
Live Dial
Enter the phone number by using the
keypad; the radio sends out the numbers
as the keys are pressed.
Buffered
Dial
1. Enter the phone number by using
the keypad; the radio saves the
selected numbers in a buffer.
2. Press and release the PTT; the
radio sends out the numbers in its
buffer.
1. Press and hold the PTT, while talking into the
microphone.
2. Release the PTT when you Þnish what you
want to say, and wait for the response.
3. Repeat steps 1 and 2 until the conversation
ends.
To Next Page
Loading...
