13
English
BASIC USER GUIDE
ACCESSORY INFORMATION
Attaching the Battery
1. Fit the extensions at 
the bottom of the 
battery into the slots 
at the bottom of the 
radio’s body.
2. Press the top part of 
the battery towards 
the radio until you 
hear a click.
 
Removing the Battery
Ensure radio is switched off.
1. Slide the battery 
latches, on both sides 
of the battery, down
-
wards.
2. Pull the top part of the 
battery away from the 
radio’s body, and 
remove the battery.
Caution: The following section on attaching/
removing Belt Clips - excludes the ATEX radios 
which must use the mandatory carry case)
Attaching the Belt Clip 
1. Align the grooves of the 
belt clip with those of 
the battery.
2. Press the belt clip 
downwards until a click 
is heard.
 
Removing the Belt Clip=
1.Use a key to press the belt 
clip tab away from the battery.
2.Slide the belt clip upwards 
to remove it. 
1
2
Slots
2
1
Battery 
Latches
2
1
Belt Clip Tab
6866546D12-P.book  Page 13  Thursday, September 27, 2007  1:06 PM