Wireless Camera Quick Start Guide
Page 3
3 Using the screws provided, secure the camera to the wall. When mounting the screws to the wall,
leave 1/16" (1.6 mm) space between the screw head and the wall. Using the mounting holes,
slide the camera down on to the screws until it is firmly seated.
4 Position the camera to view the desired area and plug in the power supply. Please keep in mind
that the field of view is 80 degrees and motion sensor distance works up to 12 -14 ft. (3.5 - 4 m).
5 Make slight adjustments to the camera-viewing angle by tilting and panning the camera head by
hand.
6 It is recommended that the antenna be set vertically.
Tabletop Mount Your Wireless Camera
The camera can be placed on any level surface.
1 Plug the power supply into camera and then to the wall.
2 Make adjustments to the camera viewing angle by tilting and panning the camera head with your
hand.
3 Adjust the antenna as needed. It is recommended that the antenna stay at a 90-degree angle to
the base of the camera for the best wireless reception.
Mounting
Holes
Power Insert
Discovery
Button
To Next Page
Loading...
Need help?
General
