Quick Start Guide Wireless Camera
Page 6
Mounting tools: Screwdriver, electric drill or awl. On hard surfaces, pre-drill ½ inch deep pilot holes
with a drill bit slightly smaller than the camera mounting screws before securing the camera to the sur-
face. When mounting a camera on soft surfaces like sheetrock, use an awl to punch holes in the mate-
rial slightly smaller than the plastic anchors included in the hardware mounting kit.
The illustrations are drawn to a one-to-one scale which means they provide the exact dimensions required to
mount the unit.
Wall Mounting Drilling Template
Drill Holes In
These Positions
To Next Page
Loading...
