9
English
Note: When the wireless headset is paired to the phone and there is no
activity for 5 minutes, the blue flashing LED turns off. Any button press on the
headset will reawaken the headset and the flashing resumes. If you press the
up and down volume buttons simultaneously, the flashing LED turns off.
Audio tones
Audio Tone Headset status
Single high tone when pressing Volume maximum or minimum reached
volume button
Five rapid high tones, repeated Low battery
every 20 seconds
No audio indications; Out of range
deteriorating audio quality
Series of 4 tones, low to high Active call
Ring tone Incoming call
Single high tone Pairing confirmation
Single low tone Initiate voice activation
Dual high/low tone voice Voice tag not recognized
Single high tone End call
Series of 4 tones, high to low Call ended
If you have additional questions, please call your local hotline or visit us at
www.hellomoto.com
To Next Page
Loading...
