15
Getting Started
English
GETTING STARTED
ADJUSTING THE VOLUME
SELECTING A RADIO CHANNEL
Your radio offers either 4 or 16 channels.
Note:
Due to government regulations, some
channels may not be programmed. Ask
your dealer for more information.
To select a channel, turn the
Channel
Selector
knob clockwise or counterclockwise
until you reach the desired channel.
SENDING A CALL
RECEIVING A CALL
1
Hold down the
Volume Set
or
Monitor
button
(see page 5); you will hear a continuous tone.
2
Turn the
On/Off/Volume Control
knob to the
desired volume level.
3
Release the
Volume Set
or
Monitor
button.
1
Turn your radio on.
2
Use the
Channel Selector
knob to select the
desired channel.
3
Hold the radio in a vertical
position, press the
PTT
button,
and talk at a distance of about
1 to 2 inches (2.5 to 5 cm)
from the microphone.
4
Release the
PTT
button to listen.
1
Turn your radio on.
2
Adjust the radio’s volume (see page 15).
3
Switch to the desired channel.
Hold the radio in a vertical
position with its microphone 1
to 2 inches (2.5 to 5 cm) away
from your mouth.
#WarisN/APopUser.book Page 15 Tuesday, November 3, 1998 2:08 PM
To Next Page
Loading...
