Motorola HT750 - Deleting a Nuisance Channel; Restoring a Channel Back to the Scan List; Scan Channel Discovery Alert

Scan
20
English
SCAN
DELETING A NUISANCE CHANNEL
If a channel continually generates unwanted calls
or noise (a “nuisance” channel), use the Scan
button to temporarily delete the channel from the
scan list:
Restoring a Channel Back to the Scan List
To restore a previously deleted channel back to
the scan list, restart the scan operation or turn
your radio off and on again.
SCAN CHANNEL DISCOVERY ALERT
This feature enables you to identify the last
channel monitored before scanning was
stopped. To identify the last channel monitored,
turn the Channel Selector knob until you hear
an alert tone.
1 While the radio is on the nuisance channel, hold
down the
Scan button until you hear a tone.
2 Release the Scan button. The nuisance chan-
nel is deleted.
Note:You cannot delete a priority channel or the
last remaining channel in a scan list.
#WarisN/APopUser.book Page 20 Tuesday, November 3, 1998 2:08 PM