Motorola HT750 - Page 22

Phone
22
English
PHONE
3 When you hear a dial tone:
Enter the phone number using the keypad.
– or–
a Press and release the preprogrammed
Speed Dial button (see page 6) to use the
Speed Dial feature.
b Press the key (1 to 9) corresponding to the
number you want to call, or press “0” if you
want to call the last number dialed.
Note: Press the PTT button, if required for your
radio.
Note: To redial the last number dialed (if not
using Speed Dial), press and release the
PTT button. The radio sends the last
number dialed.
– or–
If you entered your access code using
the keypad, press the
/ key once to
access the last number dialed; then
press and release the PTT button.
4 Hold the radio in a vertical
position with the microphone 1
to 2 inches (2.5 to 5 cm) away
from your mouth. Press and
hold the PTT button to talk;
release it to listen.
5 To end a phone call:
Enter the deaccess code using the keypad.
– or–
If your radio has the deaccess code prepro-
grammed, Press the Phone button to exit
Phone Mode.
#WarisN/APopUser.book Page 22 Tuesday, November 3, 1998 2:08 PM