Motorola i576 - Page 197

Data Services
Section 3B. Data Services 185
4. Under Manufacturer, select [Standard Modem Types].
For Model, choose
Standard 19200 bps Modem, and
click
Next to continue.
5. Select the COM port you want your phone installed
on, and click
Next and then Finish to complete the
installation.
Creating a Dial-up Connection
In order to connect to the Internet or a Network using
your phone, you must set up a dial-up connection.
1. From the Control Panel select Network and Internet
Connections
, and then select Network Connections.
2. Under Network Tasks, select Create a New
Connection
. When the New Connection Wizard
appears, click on
Next to continue.
3. Select Connect to the Internet and click Next.
4. Select Set up my connection manually and click Next.
5. From the Internet Connection screen, select
Connect Using a Dial-up Modem and click Next.
6. Name the dial-up connection and click Next.
7. To connect via packet data, enter S = 2, and
click
Next.
8. Enter the user name and password for your
Internet service and check the appropriate fields
for connecting to your service provider (if
applicable). Click
Next and then Finish to complete
the process.
Note
To get to New Connections in Classic View, from the
Control Panel select
Network Connections, and click
on
New Connection Wizard.
Important
You may be prompted to select the modem
you would like to use. Make sure you choose
the Standard 19200 bps modem you created
earlier.
Tip
It might be helpful to give this dial-up connection a
name that will remind you it is a modem connection
for your phone.
Important
Packet Data users must be provisioned for
Packet Data by their carrier.