Private LINCaround Calls
Press the PTT button.
Private LINCaround Calls
You can have a private conversation with another
person using LINCaround. When on a private
LINCaround call, no other parties can hear your
conversation. In order to make a private
LINCaround Call, you must use the valid 10-digit
Personal Telephone Number (PTN) of the person
you are calling. The person you are calling must be
in LINCaround and set to the same channel to
receive your call.
If you receive an error message:
• You may not be using a valid PTN.
• The person that you are trying to reach may not
be in LINCaround.
• The person that you are trying to reach is set to
a different channel or is out of range.
Private Only
To limit LINCaround to private conversation only,
set your code to Pvt Only. In this mode, code calls
will be ignored and only private calls can be made
or received.
Note: You will be required to enter a valid PTN
before pressing the PTT button.
To set the code to Pvt Only:
1 From the LINCaround idle screen, press A
under Edit.
2 Scroll to Code.
3 Press A under Edit.
4 Select Pvt Only.
Making a Private LINCaround Call
1 Enter the 10-digit PTN of the person you want to
call on your channel. -or-
Scroll to a number or name in Contacts. -or-
Scroll to a number in the recent calls list.
2 Press and hold the PTT button. Begin speaking
after your phone emits the LINCaround tone.
3 Release the PTT button to listen.
The number or name of the person you are calling
will appear in the first line of the display.
Receiving a Private LINCaround Call
The number or name of the person who initiated
the call will appear in the first line of the display.
Note: You can reply within 6 seconds simply by
pressing the PTT button.
To Next Page
Loading...
