10 Getting started
Wall mounting on corded base
This phone can be mounted on any standard wall plate.
1.
Plug the power adapter with smaller pin plug & telephone line cord into the corded base.
2.
Snap the wall mount adapter into the notches on the corded base’s back.
3.
Plug the other end of the power adapter & telephone line cord into the wall jack.
4.
Align the mounting slots on the corded base with the mounting posts on the wall. Then push in and down until
the phone is firmly seated.
NOTE
DO NOT use a power outlet controlled by a wall switch.
Make sure the wall is capable of supporting the weight of the phone, and use the proper type of anchoring device for
the wall material.
To Next Page
Loading...
Need help?
General
