Using the cordless handset 37
Enjoy your cordless handset phone
9. Using the cordless handset
9.1 Calls
9.1.1 Make a call
1.
Press < or J.
2.
Dial the phone number.
9.1.2 Predial
1.
Enter the phone number (maximum 32 digits). If
you make a mistake, press
M to delete a digit.
2.
Press < or J to dial the phone number entered.
9.1.3 Dial one touch numbers 1 to 9
1.
Press and hold a key from 1 to 9 until the
number is displayed and dialed.
NOTE
You need to set the one touch number first.
- If no number is stored, you hear a double beep.
9.1.4 Call from the phonebook
1.
Press .. The first entry in the phonebook is
displayed.
2.
Scroll , to the entry you want.
3.
Press < or J to dial the number.
TIPS
Instead of scrolling to browse the phonebook entries,
press the numeric key corresponding to the first letter of
the entry you wish to locate. For example, pressing
2
will show the entries starting with A. Pressing
2 again
will show the entries starting with B, etc.
9.1.5 Call from the calls list
NOTE
You need to subscribe to your network's Caller ID
service to be able to see the caller's number in the calls
list. See section “11. Caller ID” for more details.
1.
Press /. The first entry in the call list is displayed.
2.
Scroll , to the entry you want.
3.
Press < or J to dial the number.
9.1.6 Answer a call
1.
When the phone rings and flashes in the
display, press
< or press J to answer the call
via the loudspeaker.
WARNING
When the phone is ringing, avoid holding the earpiece
too close to your ear as it may damage your hearing.
Handsfree activation can suddenly increase the volume
To Next Page
Loading...
Need help?
General
