8 Getting started
Install and charge the cordless handset
battery pack
1.
Slide out the battery compartment cover.
2.
Place the supplied rechargeable battery pack in the
battery compartment, with the battery connector
plugged in, as shown.
3.
Slide the battery compartment cover back.
4.
Put the cordless handset on the cordless charger to
charge for at least 24 hours. When the cordless
handset is fully charged the will indicate that it is
fully charged.
5.
Use only the rechargeable battery pack provided.
Install the cordless charger
1.
Plug the power adapter with bigger pin plug into the
cordless charger.
2.
Plug the other end of the power adapter into the
wall jack.
3.
Use only the provided power adapter.
To Next Page
Loading...
Need help?
General
