14 Using the phone
3. Using the phone
3.1 Making a call
1. Enter the phone number and then press /FLASH or
/SPEAKER to dial the phone number.
3.2 Speed dial calling
1. In idle mode, press and hold a key from / /1 to
WXYZ/9 until the number is displayed and dialed.
3.3 Answering a call
1. Press /FLASH or /SPEAKER to answer the
incoming call.
3.4 Ending a call
1. During a call, press /BACK or put the handset on
the base.
3.5 Adjusting volume
1. During a call, press VOL+ or REDIAL/VOL- to adjust
the volume.
An/09
Flashing: Indicates an incoming call/recording of
an incoming call. The number (e.g. 09) indicates
the total number of new messages.
LA
Flashing: Indicates the line remote access is in
progress.
L3
Steadily ON: Indicates the base speaker volume
level is 3. Nine volume levels from L0 to L8 are
provided (L0 means ringer off) during message
playback. Five volume levels from L0 to L5
(independent of the volume levels during
message playback) are provided during an
incoming call. L3 disappears after 3 seconds.
To Next Page
Loading...
Need help?
General
