26 Using the phone
3. Press MENU and then VOL+ or REDIAL/VOL- to select
ON
or
OFF
.
4. Press MENU to confirm.
To enter the remote access mode, dial your phone number
from another phone, when you hear the announcement, press
TONE/* on your another phone and then enter the 4- digit
remote security code (the default code is 0000). The correct
sequence of the 4 security PIN digits needs to be detected
before entering remote access mode. Random digits detected
prior to the correct 4 digits sequence are ignored, and the
answering machine recording continues until the complete
PIN is detected. There is no system prompt to enter the
remote access code.
Press the following keys on your another phone to perform the
following functions, after entering your remote access mode.
3.21.10 Setting the security code
This is used to change the remote access PIN if necessary.
1. Press MENU and then VOL+ or REDIAL/VOL- to select
ANSWER MACHINE
.
2. Press MENU and then VOL+ or REDIAL/VOL- to select
SECURITY CODE
.
3. Press MENU and then enter the 4- digit security code.
4. Press MENU to save.
Press... To...
1 Repeat the message
2 Play/Stop the current message playback
3 Skip forward to the next message
4 Toggle Answer Off/Announce Only/Announce
and Record modes
5 Delete the message
7 Listen to the Main Menu (for full voice prompts
only)
To Next Page
Loading...
Need help?
General
