Motorola MB8600 - Modem Ports and Controls; Ethernet and Coax Ports; Power and Reset Buttons

4
RESET button
ETHERNET (LAN)
Connect this port to a
computer. Alternatively, you
can connect to a WiFi router -
see
If You Want to Connect a
Router
, below. (In the unlikely
event that you are using port
bonding, please remove the
yellow panel label and see
www.motorolanetwork.com/31
for details.)
COAX
Connect a “live” coax
cable to the modem’s COAX
connector as discussed
above. (Tighten the nut so it’s
finger tight. You may
want to use the supplied
wrench. Make the connection
snug but not over-tight.)
ON/OFF button
POWER
Connect the supplied power
cube between the power jack
and an electrical outlet.