EasyManuals Logo

Motorola SB6120 - SURFboard - 160 Mbps Cable Modem User Manual

Motorola SB6120 - SURFboard - 160 Mbps Cable Modem
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Notes Power Receive Send Online Link
A
Power On
B
Downstream Scan
C
Upstream Range
D
Network Connect
E / / /
LINK/Channel Bond
F
Power Off
G /
Network Access Off
H /
Firmware Upgrade in Progress
Power On Self Test (POST). If LED remains off, modem is faulty.
Scanning downstream frequencies.
Scanning upstream frequencies.
Downstream and upstream acquired. Modem processing for DHCP,
TFTP, and TOD.
Ready. PC/Activity is solid when a CPE is connected and blinks when
transmitting or receiving data.
Powered off.
Modem is successfully registered but Network Access Control
(NACO) is disabled via DOCSIS
®
configuration file.
Performing firmware upgrade.
LED Status
SURFboard
®
SB6120 Series eXtreme Cable Modem
A
B
C
D
E
F
G
H
- On (Receive and Send - Connected Single Channel)
- Off
- Flashing
(Link - 10Base-T or 100Base-T Ethernet)
- On (Receive and Send - Connected Bonded Channel)
(Link - High-speed Gigabit Ethernet)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Motorola SB6120 - SURFboard - 160 Mbps Cable Modem and is the answer not in the manual?

Motorola SB6120 - SURFboard - 160 Mbps Cable Modem Specifications

General IconGeneral
ModelSB6120
TypeCable Modem
Maximum Download Speed160 Mbps
Maximum Upstream Data Rate120 Mbps
Max Upload Speed120 Mbps
DOCSIS StandardDOCSIS 3.0
Ethernet Ports1
Connectivity TechnologyWired
InterfaceEthernet
Channels4 Downstream, 4 Upstream
CompatibilityCompatible with most cable internet providers
Weight1.2 pounds

Related product manuals