EasyManuals Logo

Motorola MBP36XL-G2 Faq

Motorola MBP36XL-G2
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
• Check whether the Parent Unit is powered on (green ON/OFF LED lit)
• Check that the pre-installed battery is not drained.
• Recharge the Parent Unit by connecting it to the power supply.
I have more than one camera paired but the view is from only one camera. How do I select
which camera I am viewing?
Related Products Motorola MBP36XL
This function is only available when you have more than 1 Baby Unit (Camera). 1. Press the
MENU button and the menu bar will pop up. 2. Press the LEFT button or RIGHT button until is
highlighted, and the del/ add/ view/ scan menu will pop up. 3. Press the UP button or DOWN
button to select scan, and press the OK button to confirm. 4. The screen will then display
images from different registered cameras in a loop of Camera 1*/ 2/ 3/ 4, changing about every
12 seconds. TIP: Quick Method to View Cameras instead of entering into the menu bar. Directly
press OK repeatedly to select the available Camera options from Camera 1/ 2 / 3 / 4 / Camera
Scan icon.
Does the baby unit need to be plugged in all the time?
Related Products Motorola MBP36XL
The Baby Unit is able to operate without mains power for up to 3 hours with the support of a
built-in rechargeable battery (Ni-MH battery 2.4V, 900mAh). Please charge the unit at least 16
hours before first time use.
I just purchased an additional camera. How do I pair a second camera?
Related Products Motorola MBP36XL
Select ”add“ at the camera menu screen on the display. Select a camera, 1, 2, 3, or 4. An LED on
the display will blink and the display will show ”press pair on cam“. On the bottom of the
camera unit, press the pair button. A confirmation beep will sound.
Do I need to register my baby unit to the parent unit?
Related Products Motorola MBP36XL
No. The Baby Unit is pre-registered to your Parent Unit. You do not need to register it again
unless the Baby Unit loses its link with the Parent Unit. Please consult your User Guide should
you need to Pair your Units together again.
How do I use the stargrip?

Other manuals for Motorola MBP36XL-G2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Motorola MBP36XL-G2 and is the answer not in the manual?

Motorola MBP36XL-G2 Specifications

General IconGeneral
BrandMotorola
ModelMBP36XL-G2
CategoryBaby Monitor
LanguageEnglish

Related product manuals