Motorola MBP481-2 - Adjust the Lcd Brightness of the Parent Unit; Set the Alarm on the Parent Unit; Monitor the Temperature; Temperature Format

Doc Title : Product Data – User’s Guide Revision : R.00
Model : MBP481 Page(s) : 12 of 17
This document contains confidential and proprietary information of VTech Telecommunications Ltd
3.5 Adjust the LCD brightness of the parent unit
You can adjust the brightness of the parent unit screen from Level 1 to Level 5.
1. Press
when the parent unit is not in use. is displayed.
2. Press
or to adjust the brightness.
3. Press OK to confirm your selection.
3.6 Set the alarm on the parent unit
You can use the parent unit to set the alarm as a reminder for you to take care of your baby.
Turn on and set the alarm when it is currently off:
1. Press
when the parent unit is not in use.
2. Press
or to scroll to .
3. Press
or to choose On, then press OK.
4. Press and then press or to scroll to again.
5. Press
or to choose 2h, 3h, 4h, 5h or 6h
6. Press OK to confirm your selection.
Turn off the alarm when it is currently on:
1. Press
when the parent unit is not in use.
2. Press
or to scroll to .
3. Press
or to choose Off
4. Press OK to confirm your selection.
3.7 Monitor the temperature
Your baby unit measures the surrounding temperature. If the detected temperature falls beyond a desired
temperature range, you will hear an alert tone. You can change the settings for the temperature format as follows.
3.7.1 Temperature format
You can choose to display the temperature in
o
F or
o
C.
1. Press
when the parent unit is not in use.
2. Press
or to scroll to .
3. Press
or to choose
o
F or
o
C.
4. Press OK to confirm your selection.
3.8 Delete a baby unit
You can choose to remove a paired baby unit from the parent unit.
1. Press
when the parent unit is not in use.
2. Press
or scroll to .
3. Press
or to select the desired baby unit (1, 2, 3 or 4).
4. Press
or to choose YES or NO
5. Press OK to confirm your selection.
3.9 Set the screen off time of the parent unit
You can set the screen of time the parent unit after being in the idle mode for a particular time interview.
1. Press
when the parent unit is not in use.
2. Press
or to scroll to .
3. Press
or select (60m, 30m, 5m or OFF).
4. Press OK to confirm your selection.