10 Getting Started
2. Getting Started
2.1 Baby Unit Power Supply
1. Connect the small plug of the power adapter to the Baby Unit (camera) and
the other end to a suitable mains power socket.
NOTE
Only use the enclosed power adapter (5V DC / 1000mA).
2. Slide the POWER ON/OFF switch to the ON position. The power LED will
light up in red.
3. Slide the POWER ON/OFF switch to the OFF position to turn the Baby Unit
off.
2.2 Parent Unit Power Supply
IMPORTANT
The Parent Unit is assembled with a built-in rechargeable battery pack (Lithium-
ion battery
3.8V
2000
mAh), please charge it for 16 hours before initial use. The
battery is not a user-accessible item. Please contact the helpline if you think it
needs replacing.
To Next Page
Loading...
