Motorola MBP10 User Manual

MBP10 - Quick Start Guide
For a full explanation of all features and instructions, please refer to the User's Guide.
1 Setting up your digital baby monitor
Removing the battery cover
A
• Turn the battery cover
screw 90 degrees in a
counterclockwise
direction.
• Lift off the battery
cover.
90° MAX
Installing the batteries for the Parent unit
B
+ -
+
-
+ -
• Do not install non-rechargeable
batteries! Use only AAA rechargeable
batteries of the same type.
• Insert the batteries as shown, replace
the battery cover and turn the battery
cover screw 90 degrees in a
clockwise direction.
Note: Charge the batteries for 15 hours
before using without mains power.
Connecting the power supply for the baby unit
D
• Only use the enclosed
adapter (6V DC/300mA).
Connecting the power supply for the parent unit
C
• Only use the enclosed
adapter (6V DC/300mA).
MBP10_QSG_EN_PE.fm Page 1 Monday, August 31, 2009 6:03 PM

Motorola MBP10 Specifications

General

Camera	Yes
Night Vision	Yes
Type	Digital
Low battery indicator	Yes
Number of Cameras	1
Operating frequency	2.4 GHz
Power source	Rechargeable battery

Summary

Setting Up Your Digital Baby Monitor

Removing the Battery Cover

Instructions to remove the battery cover by turning the screw 90 degrees counterclockwise and lifting it off.

Installing Parent Unit Batteries

Guide to install rechargeable AAA batteries, replace the cover, and turn the screw clockwise. Charge for 15 hours.

Connecting Parent Unit Power Supply

Connect the enclosed adapter (6V DC/300mA) to the parent unit.

Connecting Baby Unit Power Supply

Connect the enclosed adapter (6V DC/300mA) to the baby unit.

Basic Operation of Keys

Parent Unit Key Functions

Describes the ON/OFF button for switching the unit and UP/DOWN buttons for volume control.

Baby Unit Key Functions

Explains the ON/OFF button for unit control and the PAGING button to locate the parent unit.

General Information and Troubleshooting