Motorola MC32N0 SERIES - User Manual

3
4
5
1
2
6
Four Slot Cradle
FEATURES
Installing an Optional microSD Card Charge the MC32N0
Single Slot Cradle
GETTING STARTED
QUICK START GUIDE
24hr*
Installing the Battery
Trigger
Stylus
Display
Scan Button
Keypad
Indicator LED Bar
Strap Lanyard
Trigger
Speaker
Headset Jack
Speaker
MC32N0-G
MC32N0-R
MC32N0-S
Scan Indicator
Scan Button
Display
Receiver
Indicator LED Bar
Scan Button
Keypad
Power
Microphone
Battery Release Button
Battery Release Button
Scan Button
Speaker
Stylus
Handstrap
Battery Release Button
Scan Button
MC32N0-S/R
Rotate Turret
1. On the MC32N0-R/S, loosen the
handstrap.
2. Align the top of the battery into the
battery compartment.
3. Rotate the bottom of the bottom
into the battery compartment.
4. Press the battery down until it
snaps into place.
5. On the MC32N0-R/S, tighten the
handstrap.
Back View
Back View
MC32N0-R
1. Remove the SD card cover using
stylus.
2. Slide the SD card holder down to
unlock.
3. Lift the SD card holder.
4. Place the microSD card into the
contact area.
5. Close the SD card holder and slide
the SD card holder up to lock.
6. Replace the SD card cover and
ensure that it is installed properly.
Speaker
Stylus
Headphone Jack
Handstrap
1. Install battery adapter into
spare battery slot.
2. Install battery into adapter.
MC32N0 SERIES
It is recommended that this product be charged for 24 hours before the first use
to ensure that the internal battery is fully charged.
*

Motorola MC32N0 SERIES Specifications

General

Category	Barcode Reader
Model Series	MC32N0
Form Factor	Handheld
Processor	Marvell PXA 806 MHz
Keypad	Numeric keypad with function keys
Scanner Type	1D Laser, 2D Imager
Wireless Connectivity	802.11a/b/g, Bluetooth
Ports	USB, RS232
Weight	368 g (with standard battery)
Operating Temperature	-20° C to 50° C
Sealing	IP54
Expansion Slot	SD card slot
Dimensions	74 mm

Summary

Device Features Overview

MC32 N0-G Model Features

Overview of the physical features and components of the MC32N0-G model.

MC32 N0-S;R Model Features

Overview of the physical features and components for MC32N0-S and MC32N0-R models.

MC32 N0-S;R Back Panel Views

Detailed views of the back panel components for MC32N0-S and MC32N0-R models.

MC32 N0-R Turret Rotation

Instructions for rotating the scan turret on the MC32N0-R model.

Getting Started with MC32 N0

Installing Optional microSD Card

Step-by-step guide for installing an optional microSD card into the device.

Installing the Battery

Instructions on how to correctly install the battery into the MC32N0-R/S device.

Charging the MC32 N0 Device

Guide on charging the MC32N0 device using single and four slot cradles.

Battery Removal Procedures

Removing Battery from MC32 N0-R;S

Procedure for safely removing the battery from MC32N0-R and MC32N0-S models.

Removing Battery from MC32 N0-G

Procedure for safely removing the battery from the MC32N0-G model.

Data Capture Options

MC32 N0 Scanning Capabilities

Explains scanning capabilities for MC32N0 models using Imager and Laser Scanner.

Ergonomics for Scanning

Optimal Body Posture for Scanning

Guidance on maintaining optimal body posture for efficient scanning at different levels.