3.3 Device Addressing Schemes .................................................................................15
3.3.1 Network DHCP Scheme.............................................................................................16
3.3.2 Statically Provisioned Scheme ...................................................................................16
3.3.3 User Supplied Scheme...............................................................................................16
3.4 Setting User Supplied IP Addresses .....................................................................17
3.5 External Device Provisioning.................................................................................19
3.5.1 Connecting to the Ethernet Port .................................................................................20
3.6 Working with MeshTray..........................................................................................20
3.6.1 MeshTray Status Information .....................................................................................21
3.6.2 MeshTray Security Tab ..............................................................................................22
3.6.3 MeshTray Authentication Activity ...............................................................................22
4 DEVICE MAINTENANCE....................................................................................... 24
4.1 Changing the Web Interface Password.................................................................24
4.2 Upgrading the Device Firmware ............................................................................26
4.3 Security Provisioning Web Page ...........................................................................28
4.3.1 Provision Username Section ......................................................................................28
4.3.2 Provision Groupname Section....................................................................................28
4.4 Resetting the VMM via the Device Administration Web Page.............................29
4.5 Restoring Factory Settings – User Supplied Mode Limitations..........................31
4.5.1 Recovering from VMM Reset-to-Default in User-Supplied Mode...............................31
4.5.1.1 Resetting Device Addressing Mode Using Device Manager.........................31
4.5.1.2 Resetting Device Addressing Mode via Configuration Web Page................31
4.5.1.3 Resetting User-Supplied Parameters via Configuration Web Page..............31
4.6 Restoring Factory Settings – Normal Operations................................................32
5 CUSTOMER SERVICE INFORMATION ................................................................34
5.1 Obtaining Support...................................................................................................35
5.1.1 System Information.....................................................................................................35
iv
To Next Page
Loading...
