Chapter 1
Introduction
1-1. Notational Conventions
Throughout the text in this publication, you will notice the use of warnings, cautions and notes. These
notations are used to emphasize that safety hazard exist, and care must be taken and observed.
Warning
This Warning symbol denotes a hazard. It calls attention to a procedure
or practice that could result in personal injury if not performed correctly.
Caution
The Caution symbol denotes a hazard. It calls attention to a procedure or
practice that could result in damage to or destruction of part or all of the
product if not performed correctly.
Note
An operational procedure, practice or condition, etc., which is essential to
emphasize.
Throughout this manual, MICOM-3F, MICOM-3T and MICOM-3R are referred to as MICOM-3.
1-2. Scope of this Manual
This manual includes model/kit information, specifications, disassembly/reassembly procedures,
alignment, troubleshooting, and all theory, schematic diagrams, printed circuit board details and parts
lists for all parts in the equipment described.
Caution
This manual is intended for use by experienced technicians who are familiar
with similar types of equipment.
Cat. No. 6886859J01
1-1
To Next Page
Loading...
