Chapter 6
Troubleshooting
6-1. Overview
In case of malfunctioning, perform the following steps (refer to the Maintenance section in the
MICOM-3F/3T/3R HF-SSB Transceivers Owner's Guide, publication number: 6886867J01:
1. Use BITE function
2. Refer to the User Troubleshooting Chart
3. Follow the troubleshooting procedures in this section which provide instructions for isolating
faulty boards.
Troubleshooting a board at component level should be performed according to the relevant
schematic diagrams.
6-2. Troubleshooting Charts
This section contains two troubleshooting charts:
• Receiver
• Transmitter.
Cat. No. 6886859J01 6-1
To Next Page
Loading...
