EasyManua.ls Logo

Motorola moto g power 5G - SIM Card and Connectivity Setup

Motorola moto g power 5G
105 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Get Started
eSIM
Your phone may have an eSIM (embedded SIM card) in addition to the physical SIM card. With an
eSIM, you don’t have to worry about inserting it as it’s already in the phone.
Contact your service provider for details if you want to activate and use your eSIM.
Note: Not all carriers support eSIM.
Insert the SIM and microSD cards
To activate phone service, you might need to insert a SIM card, or this may have been done for you.
You can also add a microSD card, which is optional and sold separately.
Note: Make sure you use the correct size SIM card and don’t cut the SIM card. To avoid damage to the
phone, only use the SIM card included in the box or provided to you by Cricket.
1 Insert the SIM tool into the SIM tray hole to pop out the tray.
Tip: Refer to the diagram below for tray and hole location.
2 Insert the SIM card with the gold contacts down, then gently push the tray into the slot.
3 Add a microSD card for additional storage.
Note: microSD card is optional, sold separately.
SIM card insert graphic. Make sure the SIM card is inserted correctly.
Nano SIM
SIM
1
2

Table of Contents

Related product manuals