Connect, share, pay & sync
» Security: Select the type of security you want: WPA3-Personal, WPA2/WPA3-Personal,
WPA2-Personal or None. If prompted, enter a unique password (8 characters min.) that others will
need to access your Wi-Fi hotspot.
» Hotspot password: Set or change your hotspot password.
Note: To turn o the hotspot automatically, tap Timeout setting. To set which devices can connect to
the hotspot, tap Manage devices > Manage allowed devices.
Mobile network
Your phone uses your Wi-Fi network to access the Internet. When a Wi-Fi network is not available,
you can use your mobile phone network.
Mobile data is on by default. To turn it o, swipe the status bar down and tap
Mobile data.
To see network settings options, swipe up from the home screen and tap
Settings > Network &
internet > Mobile network.
Note: You should not need to change any network settings. Contact your service provider for help.
Connect with Bluetooth wireless
Turn on and connect devices
Find it: Swipe up from the home screen and tap Settings > Connected devices > Pair new device
Or, to quickly turn on or open Bluetooth settings, swipe the status bar down and tap
Bluetooth.
Touch and hold it to open Bluetooth settings.
Note: If Bluetooth is not on, it will turn on to pair a new or previously connected device.
1 Make sure the device you are pairing with is in discoverable mode (for details, refer to the guide
that came with the device).
2 Swipe up from the home screen and tap Settings > Connected devices > Pair new device.
3 Tap a found device to connect it. Tap and choose what the device will be used for. You can tap
next to a saved device and tap to rename the device.
Tip: To automatically disconnect or reconnect a device, just turn the connected device o or on.
Note: Using a mobile device or accessory while driving may cause distraction and may be illegal.
Always obey the laws and drive safely.
To Next Page
Loading...
