Motorola moto X - Page 3

Motorola Moto X – Disassemble Guide
Page 3 of 7
hp://www.fixez.com/
Before completely removing the rear cover you need to
release the camera flash ribbon cable from its socket.
Release the cable by lifting the side opposite the cable
up 90 degrees.
You can now remove the rear case from the Moto X (be
sure to keep track of the power & volume buttons).
4.
Next, locate and remove the eleven T5 torx
screws that secure the upper & lower protective
covers/housing to the motherboard (marked with
orange circles).
5.
First, remove the lower protective cover; it should
release easily with the securing screws removed.
6.
Baery