Identifying Radio Controls
English
5
Programmable Buttons
Your dealer can program the programmable buttons as
shortcuts to radio functions or up to a maximum of six (6)
preset channels/groups depending on the duration of a button
press:
• Short press – Pressing and releasing rapidly.
• Long press – Pressing and holding for the programmed
duration.
• Hold down – Keeping the button pressed.
NOTE: The programmed duration of a button press is
applicable for all assignable radio/utility functions or
settings. See Emergency Operation on page 38 for
more information on the programmed duration of the
configured Emergency button.
Assignable Radio Functions
Analog Scrambling – Toggles analog scrambling on or
off.
Call Alert – Provides direct access to the contacts list for you to
select a contact to whom a Call Alert can be sent.
Call Log – Selects the call log list.
Contacts – Provides direct access to the contacts list.
Emergency – Depending on the programming, initiates or
cancels an Emergency alarm or call.
Manual Dial – Depending on the programming, initiates a
Private call by keying in any subscriber ID or phone number.
Mic AGC On/Off – Toggles the internal microphone automatic
gain control (AGC) on or off.
Monitor – Monitors a selected channel for activity.
Notifications – Provides direct access to the Notifications List.
Nuisance Channel Delete – Temporarily removes an
unwanted channel, except for the Selected Channel, from the
scan list. The Selected Channel refers to the user’s selected
zone/channel combination from which scan is initiated.
One Touch Access – Directly initiates a predefined
Private, Group Call or a Call Alert.
Permanent Monitor – Monitors a selected channel for all radio
traffic until function is disabled.
Privacy – Toggles privacy on or off.
Radio Alias and ID – Provides radio alias and ID.
Repeater/Talkaround – Toggles between using a repeater and
communicating directly with another radio.
To Next Page
Loading...
