Need help?Do you have a question about the Motorola MCS 2000 and is the answer not in the manual?
Walks through the process of programming specific features into an MCS 2000 radio.
Explains how qualified technicians can use RSS for radio alignment and configuration.
Covers procedures for aligning radio transmitter parameters for optimal performance.
Details the procedure for aligning the radio's reference oscillator after RF board service.
Explains how to limit RF power across the entire RF band by adjusting alignment points.
Covers balancing modulation contributions for low and high frequency portions of a signal.
Details the procedure for limiting modulation of a baseband signal.
Explains secondary modulation limiting using reference attenuator settings.
Covers checking and adjusting SECURE transmit deviation after service.
Explains how to check and adjust the transmitter current limit alignment.
Provides access to standard radio receiver alignment procedures.
Details adjusting corner frequencies of the RF front-end bandpass filter.
Explains adjusting for rated audio power across the radio speaker.
Covers adjusting squelch level and RF level for 12.5 kHz channel spacing.
Covers adjusting squelch level and RF level for 20 kHz channel spacing.
Covers adjusting squelch level and RF level for 25/30 kHz channel spacing.
Tunes Received Signal Strength Indication for rated audio power.
Adjusts SECURE receive signal level for proper input to VRM500.
Tunes VRM500 receive signal level at the data pin for VRM500 unit.
Accesses menus for adjusting deviation for various signalling types.
Covers checking and adjusting DTMF deviation after board replacement or alignment.
Details alignment for High Speed Trunking signal modulation.
Covers alignment for MDC-1200 signal modulation.
Guides on initializing the controller board and transferring codeplug information.
Details the process of reading codeplug data directly from a connected radio.
Details how to program modified data back into the radio's codeplug.
Defines data fields for operation on a Voice-On-Control capable site.
Configures VOC parameters for site operation.
Used to program the Trunking System configuration for the radio.
Configures the Emergency feature for the current personality.
Accesses the FLASHport Upgrade Menu for software upgrades.
Displays the radio's current system and enhancement options.
Shows the enhancement options for the radio and their current status.
Displays the contents of the FLASHkey, including software and upgrade information.
Lists available radio options and features after an upgrade.
Guides on selecting a FLASH software file to upgrade the radio.
To Next Page
General
