Need help?Do you have a question about the Motorola MSAT-G2 and is the answer not in the manual?
Identifies and describes the three main components of the MSAT-G2 satellite radio system.
Details all ports on the TU including Power, Ethernet, Serial, Handset, and Speaker connections.
Specifies voltage, current, and fuse ratings essential for powering the radio system.
Provides detailed information on the power cable's wiring, fuses, and specifications.
Covers the wiring procedures for the optional Horn Alert and Ignition Sense features.
Outlines the fundamental sequence for installing the MSAT-G2 radio.
Guidance on selecting locations and general practices for fixed site installations.
Instructions for mounting the Transceiver Unit and its associated bracket.
Lists approved cable lengths and types for connecting the antenna to the radio.
Details magnetic and permanent mounting options for the SPAC-AS-MSV220 antenna.
Explains pole mount installation for the SPAC-AS-MSV320 maritime antenna and its components.
Guidance on selecting a mounting position and installing the handset.
Step-by-step instructions for authorizing the unit for operation on the MSAT Network.
Explains error messages, their definitions, and recommended actions.
Provides a systematic approach to diagnosing and resolving installation issues.
Addresses typical issues like power, commissioning, and signal strength problems.
To Next Page
General