Introduction
The purpose of this guide is to provide assistance to personnel installing the new MSAT-G2
mobile satellite radio equipment. The guide starts off by providing installation-specific
information on each component of the radio. Installation tips are then offered for fixed-site
and vehicular scenarios. A section on commissioning instructions follows. The guide concludes
with a troubleshooting section.
Installation Warning
This product is to be installed by Authorized Service Personnel. Damages resulting in the
failure to conform to the instructions found herein, as well as standard installation practices,
will be the responsibility of the installer.
MSAT-G2 Mobile Satellite Radio
The MSAT-G2 mobile satellite radio is comprised of three core component parts: the
transceiver unit (the small black box), the antenna system (white domes) and the handset.
Figure 1 – MSAT-G2 Mobile Satellite Radio Components
MSAT-G2 Installation Guide 1
To Next Page
Loading...
