Need help?Do you have a question about the Motorola TETRA MTM800 and is the answer not in the manual?
General| IP Rating | IP54 |
|---|---|
| RF Power Output | 3W |
| Operating Temperature | -30°C to +60°C |
| Display | LCD |
| Security | Encryption |
| Channels | Up to 1000 |
| Power Output | 3W |
| Frequency Bands | 380-430 MHz, 450-470 MHz |
Information on safe usage and RF exposure compliance.
Guidelines for disposing of WEEE-compliant products according to EU regulations.
Information about Motorola's copyrighted software and intellectual property rights.
Technical specifications including RF output, speaker load, impedance, and temperature range.
Explanation of icons used in the manual for warnings, cautions, and notes.
Explanation of special notations and conventions used throughout the manual for clarity.
Introduction to the MTM800 and its features, with guidance on language settings.
Detailed description and labeling of the MTM800's physical controls and indicators.
Explains various icons displayed on the MTM800 screen, indicating signal strength and mode.
Instructions on how to turn the MTM800 on and off, including automatic power-on scenarios.
Procedures for safely removing the terminal from its power source.
Steps to unlock the MTM800 keypad if it is locked.
Guide to selecting the network for MTM800 registration before operation.
Behavior of the device when powered on with Transmit Inhibit (TXI) mode active.
Description of the Mode key and the four main call modes supported by the MTM800.
Instructions for editing text, including cursor movement and deletion.
Explanation of aliases for phone numbers and IDs, including character limits and display.
Information on checking or setting the time and date, possibly via one-touch buttons.
Procedure for permanently disabling the terminal if it is lost or stolen.
Steps for initiating and terminating calls, including PTT button usage.
How the MTM800 switches to receive mode and alerts the user about incoming calls.
Feature allowing interruption of lower priority calls to connect to higher priority incoming calls.
How the MTM800 handles PPC calls, interrupting lower priority calls for higher priority ones.
Visual indication of receiving a half-duplex private PPC.
Visual indication of receiving a full-duplex private PPC.
Explanation of high-priority group calls from dispatchers to all users.
How to cancel an incoming call, forwarding the number to the missed call list.
Features available during a call, such as loudspeaker control and microphone muting.
How to mute and unmute the microphone during calls for privacy or noise reduction.
Feature to completely disable audible and visible alerts for discreet operation.
How the terminal enters local service mode when network connection is lost.
How the terminal exits local service mode when network connection is restored.
Instructions for adjusting the volume using the rotary knob.
How to activate/deactivate the horn and light alarm for notifications.
Basic cleaning instructions for the MTM800 device.
Introduction to group calls in TMO, including talkgroup concepts, ranges, and organization.
Methods for selecting a talkgroup, including navigation keys and search features.
How to change talkgroups during or when receiving calls.
Procedures for switching between TMO and DMO modes.
How to select gateway and repeater options for DMO mode.
Introduction to DMO group calls, including direct mode communication and infrastructure usage.
Methods for selecting a talkgroup in DMO mode.
Procedures for changing talkgroups during or when receiving calls in DMO.
Procedures for switching between TMO and DMO modes.
How to select gateway and repeater options for DMO mode.
Steps to select a gateway for DMO group calls.
Steps to select a repeater for DMO group calls.
Steps to select gateway and repeater for DMO group calls.
How to make and receive private calls in DMO mode.
Information on receiving emergency group calls in DMO.
Introduction to private calls, including full-duplex and half-duplex types in TMO and DMO.
Steps to enter Private Mode to make or receive private calls.
How to use short dial numbers for faster calling.
How to scroll through stored lists of numbers and names.
Steps to make a private call in TMO mode.
Information on receiving emergency group calls in DMO.
Introduction to phone and PABX modes, including calling landline and cellular numbers.
Steps to make phone or PABX calls using the keypad.
How to dial a full phone number directly.
How to use short dial numbers for faster calling.
How to scroll through stored lists of numbers and names.
How to search for contacts by name using alphabetical order.
Overview of emergency mode, including TMO and DMO capabilities and features.
How to change range or talkgroup while in emergency mode.
How to send emergency alarms in TMO mode.
How to receive emergency group calls, including caller identity display.
Steps to initiate or answer an emergency group call in DMO.
Introduction to GPS location service and its functionality.
Critical factors affecting GPS performance and accuracy.
Steps to enter the GPS sub-menu for location services.
How to view calculated location information, including UTC, LAT, LNG, and SAT.
Methods to enter menu options by scrolling or using shortcuts.
How to exit menu or sub-menu options.
How to exit the entire menu hierarchy.
Overview of the messaging feature, including sending and receiving status and text messages.
Steps to access the messages sub-menu for various messaging tasks.
How new messages are displayed and what information is shown.
How to delete individual or all messages from the Inbox.
Troubleshooting common messages and their descriptions.
Options for setting incoming call ring styles.
How to change the device's display language.
How to connect the MTM800 to external devices for data transfer.
How to configure the MTM800's backlight settings.
How to control the displayed time and date.
How to configure the time and date display format.
Procedures for setting the time and date.
How to set the local time offset.
How to change the displayed time format.
How to change the displayed date format.
How to activate/deactivate keypad and other tones.
How to activate/deactivate talkgroup scanning and manage scan lists.
How to view the active scan list and its talkgroup status.
How to edit the contents of scan lists.
Handling calls received during text message editing.
Troubleshooting common messages and their descriptions.
Describes tones for various incoming call types.
To Next Page
