84
Setup ( 4)
To enter the sub-menu, press
– 4 Setup – Ok.
This sub-menu allows you to change your
MTM800 configuration: key tones,
language, ring style, time, date or data setup.
Setting the Ring Style ( 4 1)
This option allows you to set the incoming call ring style. Your
MTM800 features nine selectable ring styles for Duplex and
Simplex calls:
1. Press
–4 Setup–1 Ring Style–1Duplex or
2Simplex–Ok.
2. Scroll to the desired style, and press Set.
The display shows your new selection.
You will hear the new ring style
immediately for a few seconds. If
necessary, turn the Volume knob to adjust the volume.
Setting the Display’s Working Language ( 4 2)
Once in the Setup menu, select
2 Language.
The display shows the current language
used. You can customize your MTM800 to
operate in English, Simplified Chinese,
Traditional Chinese, or in a language defined by your Service
Provider. The default setting from factory is English.
Scroll to the desired language and press
Set. The display
shows the selected language for a few seconds.
Setting Up Data Mode ( 4 3)
You can connect the MTM800 to an external device (such as
a laptop or desktop PC). The MTM800 will then be capable of
transmitting and receiving data from the external device. The
Menu
1 Ring Style
Back
Ok
2 Language
3 Data Setup
Menu
Menu
Menu
2 Style 2
Back
1British
3 Style 3
Set
Menu
2Deutsch
1English
Back Set
6 <User Defined>
Menu
6815321H01_KOR.book Page 84 Wednesday, November 26, 2008 1:25 PM
To Next Page
Loading...
