37
Service Menu Functions 3
Servicing the Radio
Using the RSS
Now that the hardware and software installation is complete and the
RSS is up and running, you are ready to personalize the radio(s). The
following pages are constructed in such a manner that a qualified
service technician can keep a radio at full capability throughout its
design life by means of correct alignments and configurations.
Note: All functions (supported and unsupported) will be
displayed in the menu’s working area. The unsupported
functions (based on the radio’s model or options) will NOT be
displayed in the F-key ID area.
Menu Map
SERVICE
Transmitter Alignments
B
Reference Oscillator
Tx Power
Tx Deviation Balance (Compensation)
C
E
B
D
F
C
D
E
C
Tx Deviation Limit
Receiver Alignments
Rated Audio Calibration
Squelch Attenuator (12.5 kHz)
Squelch Attenuator (20 kHz)
Squelch Attenuator (25/30 kHz)
C
D
D
B
Signalling Alignments
DTMF
High-Speed
MDC-1200
F
Tx Deviation Limit: Reference
H
SECURE Tx Deviation
I
Tx Current Limit
B
Front-End Bandpass Filter
G
RSSI Alignment
H
SECURE Rx Discriminator Level
I
VRM500 Rx Discriminator Level
I
Controller Board Initialization Program
To Next Page
Loading...
