Motorola MCS 2000 User Manual

140
SmartZone
Environment
From the MAIN MENU, press F4 twice and then F2 twice to access this
screen.
This screen allows you to change and view parameters for the
SmartZone environment. Press Tab to select the desired field, or press
the desired function key (F1 - F10). If a field is highlighted, use the UP/
DOWN arrow keys to select the desired choice or value.
Field Definitions
Failsoft Inactivity (sec) Use the UP/DOWN arrows to make your selection or enter a value
directly. If a radio remains inactive while operating in failsoft for this
time specified in this field, the radio will momentarily leave failsoft
and attempt to find a control channel. A value of zero in this field
indicates that the radio will not leave failsoft. The valid range is 0
(zero) to 255 seconds in one-second increments.
The default is 120 seconds.
Busy Override Delay (sec) Use the UP/DOWN arrows to make your selection or enter a value
directly. This is the time interval (in seconds) during which the user
must depress the PTT button in order for the radio to issue a busy
override signal. The valid range is 2 to 6 seconds in one-second
increments.
The default is 4 seconds.
Aff. Hold Off (sec) Use the UP/DOWN arrows to make your selection or enter a value
directly. This is the time that the radio should delay before affiliating
to a new site when leaving a site which just incurred a failure. Valid
entries are 1, 3, 7, 15, 31, 63, 127 and 255 seconds.
The default is 255 seconds.
DDBB
MOTOROLA Radio Service Software Enter or Scroll to Select Value.
MCS Model:
..WIDE OPTIONS:SMARTZONE ENVIRONMENT
SMARTZONE ENVIRONMENT
-----------
Failsoft Inactivity (sec).....120 Filter Constant K1..............7
Busy Override Delay (sec).......4 Filter Constant K2..............6
Aff. Hold Off (sec)...........255 Filter Constant K3..............5
Busy Override Chirp Ack........ON Filter Threshold Constant T1...14
Display Site Trunking..........ON Filter Threshold Constant T2...1A
Full Spectrum CC Scan..........ON Filter Threshold Constant T3...20
Full Spectrum CC Scan Timer...10
RSSI OSW Counter...............80
RSSI Acceptable Threshold......61
RSSI Good Threshold............66
RSSI Excellent Threshold.......69
VC RSSI Accpt Threshold..Disabled
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP EXIT

Motorola MCS 2000 Specifications

General

Brand	Motorola
Model	MCS 2000
Category	Radio
Language	English