75
Get Codeplug Data
From Archive File
From the MAIN MENU, press F3 twice to access this screen.
The GET ARCHIVE function is used to retrieve an archive file from a
disk. Once retrieved, the file may be modified using the CHANGE/
VIEW functions or programmed into a radio.
Note: Upper case names represent sub-directories and lower case
names represent file names.
Programming Procedure 1. Press Tab to select the serial number of the radio to be retrieved.
2. Press the F8 function key to retrieve the selected file.
Function Key Descriptions
F2 - CHANGE ARCHIVE Used to specify the directory path where the archive file will be
located. The default archive path will always be the default path
specified in the CONFIGURE PATHS AND PORT screen (F9/F3).
F5 - DELETE SELECTED Allows you to delete the selected archive file. You will be prompted
before the file is deleted.
F6 - CHDIR UP Used to move one level up the directory structure.
F7 - CHDIR DOWN Used to move one level down the directory structure. Press Tab to
select a directory. The contents of the directory will be displayed.
F8 - GET ARCHIVE Retrieves the highlighted archive file. The computer will read the radio
serial number and search the specified directory path for an archive file
corresponding to that serial number. Only the specified path will be
searched. Once the file is located, the computer will retrieve the file
and return you to the GET/SAVE/PROGRAM MENU.
CC
MOTOROLA Radio Service Software Press Enter to Select File Name.
MCS Model: Press F8 to Load Codeplug File.
MAIN:GET/SAVE/PROG:GET FILE
Archive:C:\MRSS\MCS\ARCHIVE
ARCHIVE FILES
-------------
A466ASNO.331
A467ASNO.361
A469ASNO.431
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP CHANGE DELETE CHDIR CHDIR GET EXIT
ARCHIVE SELECTED UP DOWN ARCHIVE
To Next Page
Loading...
Need help?
General