162
Trunking One-Touch
Button Options
From the MAIN MENU, press F4 twice, F3, F9 and then F5 to access
this screen.
This screen can be accessed from the TRUNKING SYSTEM OPTIONS screen
(F4/F4/F3/F9) only when a radio ordered with the One-Touch feature (or a
corresponding codeplug) has been read. The One-Touch Feature is
activated by pressing a control head or handset button programmed
for one-touch operation. These buttons are programmed on the
RADIO WIDE BUTTON CONFIGURATION screen (F4/F3/F3/F2).
When a button programmed for one-touch operation is pressed, the
Phone, Private Call, Call Alert, Status, or Message corresponding to the
One-Touch Index will be initiated. This facilitates quick access to
frequently used functions.
For example, if One-Touch Button 1 feature is selected as Phone, One-
Touch Index 1 is set to 2, and a control head or handset button is
programmed as One Touch 1, then pressing the control head or
handset button will cause the radio to transmit the second telephone
number from the phone list.
Press Tab to select the desired field, or press the desired function key
(F1 - F10). If a field is highlighted, use the UP/DOWN arrow keys to
select the desired choice or value.
DDCIE
MOTOROLA Radio Service Software Use UP/DOWN Arrows to Select Choice.
MCS Model:
...TRUNKING:SYSTEM:OPTIONS:ONE TOUCH
ONE TOUCH BUTTON OPTIONS
------------------------
Button 1 Feature.......Disabled
Index..........1
Button 2 Feature.......Disabled
Index..........1
Button 3 Feature.......Disabled
Index..........1
Button 4 Feature.......Disabled
Index..........1
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP EXIT
To Next Page
Loading...
Need help?
General