Need help?Do you have a question about the Motorola Dimetra MTM300 and is the answer not in the manual?
General| Channel Spacing | 25 kHz |
|---|---|
| IP Rating | IP54 |
| Operating Temperature | -30°C to +60°C |
| Frequency Range | 380-430 MHz |
| Channel Capacity | 1000 |
| RF Power Output | 3W, 10W |
| Audio Output | 1W |
| Display | Graphical LCD |
Crucial safety, operational, and EME exposure details before using the radio.
Discusses interference with medical devices, air bag hazards, and explosive atmospheres.
Details antenna installations, product info, and EMC guidelines for vehicles.
General considerations and planning steps for dash mounting the MTM300.
Steps for installing the trunnion bracket and mounting the radio.
Explains the process of installing the DC power cable, including routing and connections.
Guides on microphone and speaker installation procedures.
Instructions for accessory plug use, disassembly, and connection plans.
Explains how to connect and install the ignition sense cable for power management.
Planning considerations and mounting procedures for transceiver and control head.
Guides on installing the transceiver and connecting it to other components.
Details installing the control head trunnion and its connections.
Covers securing and connecting the junction box to various components.
Guides on power cable installation and speaker connection.
Provides connection plans for alarm relay, emergency switch, and ignition sense cable.
Planning considerations and general setup for desktop mounting the MTM300.
Steps for installing the radio on a desktop tray and connecting accessories.
Shows the wiring for connecting the speaker to the accessory plug.
Planning considerations and mounting procedures for motorcycle installation.
Guides on installing the transceiver and connecting it to other components.
Details installing the control head trunnion and its connections.
Covers securing and connecting the junction box for motorcycle installation.
Guides on routing and connecting the DC power cable to the motorcycle battery.
Details speaker installation and connecting it to the junction box.
Provides connection plans for alarm relay, emergency switch, and ignition sense cable.
To Next Page