Desktop Mounting 35
5. Connect the speaker wires to pins 1 and 3 of the accessory plug.
Figure 37 Connection Plan for Speaker
Do not short pins 1 and 3 of the accessory connector to ground, as this may damage the
radio.
Reassembly
1. Insert the pin housing back into the shell in the opposite way it was removed. Be
certain that the 13-location side of the pin housing is facing the flat side of the shell.
Also be sure that the pin housing snaps securely into the shell and is not cocked in
the shell.
2. Install the cover back onto the accessory plug by snapping the cover over the tabs
and pressing down.
1
3
SPEAKER
VIEW UPON
INSERTION SIDE
ACCESSORY
CONNECTOR
13
1
25
14
!
C a u t i o n
To Next Page
Loading...
