38 Motorcycle Installation
• Ensure that the radio trunnion is grounded.
• Ensure that the control head and the control head trunnion are grounded.
• Verify that there is sufficient space around the units to allow air flow and removal.
• Verify that the cable from a handlebars mounted control head and to the radio unit is
long enough to allow for the handles to be turned.
• Verify that the antenna cable is routed in the shortest way to minimize power loss over
the cable.
• Check that the mounting surfaces are able to support the weight of the units.
Figure 39 Remote Mount Motorcycle Installation Overview
in Motorcycle Box
Antenna
12 V
Battery
Antenna
cable
*Use Data Junction Box FLN2483 for Data Applications
Vehicle
frame
ground
Black
Red
F1 20A
Transceiver
Junction Box FLN2451
or Data Junction Box FLN2483*
Radio Control Head
on Handle Bars
Antenna
connector
(BNC)
To Microphone
or Helmet Microphone
Fist Microphone
Accessory
connector
To Next Page
Loading...
