Need help?Do you have a question about the Motorola ASTRO Digital XTL 5000 and is the answer not in the manual?
General| Channel Capacity | Up to 1000 Channels |
|---|---|
| GPS | Optional |
| Operating Temperature | -30°C to +60°C |
| Frequency Range | VHF: 136-174 MHz |
| Digital Protocol | APCO Project 25 (P25) |
| Modes | Analog and Digital |
| Encryption | DES, AES |
| IP Rating | IP54 |
Describes typical dual-radio system components, features, and software/accessory support.
Provides details on ordering specific dual-radio system options and required items.
Explains safety notations, warnings, and symbols used in the manual for emphasis.
Provides a high-level overview and block diagram of the dual-radio system components.
Details W3 HHCH display, LED indicator, buttons, and backlight functions for radio control.
Covers Power-Up, Auxiliary Radio Button, Volume, PTT, Monitor/HUB, Emergency, and Radio Inhibit.
Explains OTAR, IV&D, Quick-Disconnect Cable, and Siren/PA operation for dual-radio systems.
Instructions for enabling the Multi-Radio Software Option in CPS for dual-radio functionality.
Details setting Multi Radio System Type to 'Dual Radio' and Primary/Auxiliary Hardware Configuration.
Describes setting a unique Radio ID Alias and adjusting Microphone Gain settings in CPS.
Covers programming Aux button, backlight, Siren/PA, and DEK accessories for dual-radio operation.
Lists power-up error codes, their types, and troubleshooting charts for resolution.
Covers preliminary planning, component placement, environmental protection, and radio mounting.
Details connecting dual-radio, power, ground, and ignition sense cables according to standards.
Explains power connections, ignition cable, and connecting the handheld control head cable.
Covers mounting HHCH, speakers, footswitch, and optimal antenna placement for performance.
Provides steps to convert a dual-radio system back to a standard single-radio configuration.
Details unsupported control-head type changes and procedures for G474 option conversion.
To Next Page
