Motorola ASTRO Digital XTL 5000 User Manual

October 27, 2004 9964416H03-O
2-2 Dual-Radio Operation: Control-Head Operation
2.2 Control-Head Operation
Figure 2-2. W3 Handheld Control Head (HHCH)
The W3 HHCH (Figure 2-2) is used to control both radios. Refer to the W3 Control Head User’s
Guide (6881096C67) for detailed information regarding the use and operation of the XTL 5000
mobile with the W3 control head. All radio features normally accessible with a W3 Control Head are
supported in a dual-radio system unless otherwise noted in this manual.
2.2.1 Display
The display shows the status of the currently selected mobile radio. When a radio is selected, all of
its displays and indicators will be seen on the control head. When a radio is deselected, the displays
and indicators, other than the LED indicator (see Section 2.2.2 on page 2-3), associated with it are
not seen. When switching between radios, the “Radio ID Alias” configured in the mobile’s codeplug
(see Codeplug Configuration) is displayed temporarily to show which radio has just been selected. If
the user is unsure which radio is selected, a long press of the Auxiliary Radio Button temporarily
displays the selected radio’s “Radio ID Alias”.
MAEPF-27650-A
MODE
HOME
2ABC1QZ
3DEF
4GHI
5JKL
6MNO
7PRS
8TUV
9WXY
0
VOL
Side Button 1 (S1)
Side Button 2 (S2)
Side Button 3 (S3)
On/Off
Button
(T1)
Push-To-Talk
(PTT) Button
LED
Indicator
Alphanumeric
Keypad
Volume
Control
Mode Control
Orange Programmable
Button
(T2)
Programmable
Button
(T3)
Display
Menu-
Select
Buttons
Softkeys

Motorola ASTRO Digital XTL 5000 Specifications

General

Brand	Motorola
Model	ASTRO Digital XTL 5000
Category	Radio
Language	English