October 27, 2004 9964416H03-O
3-2 Codeplug Configuration: Selecting the Multi Radio System Type
3.2 Selecting the Multi Radio System Type
Once the Multi Radio Software Option is enabled, the Multi Radio System Type and Hardware
Configuration pull-down menus become editable (Figure 3-2). The Multi Radio System Type can
then be set to “Dual Radio”. The “Hot Red Receiver” system type is not supported in the mobile
software, so selecting it instead of “Dual Radio” causes the Multi Radio System Type to be shown
as an “invalid field”.
Figure 3-2. Radio Wide Advanced II Screen—Multi Radio System Type Field
To Next Page
Loading...
Need help?
General