October 27, 2004 9964416H03-O
1-2 Introduction: Notations Used in This Manual
1.3 Notations Used in This Manual
Throughout the text in this publication, you will notice the use of notes, cautions, and warnings.
These notations are used to emphasize that safety hazards exist, and care must be taken and
observed. Because some notations do not apply to information found in this manual, they are not
used.
NOTE: An operational procedure, practice, or condition that is essential to emphasize.
You might also find in this manual the use of the asterisk symbol (*) to indicate a negative or NOT
logic true signal.
CAUTION indicates a potentially hazardous situation which, if
not avoided, might
result in equipment damage.
WARNING indicates a potentially hazardous situation
which, if not avoided, could
result in death or injury.
DANGER indicates an imminently hazardous
situation which, if not avoided, will
result in death or
injury.
!
C a u t i o n
!
W A R N I N G
!
D A N G E R
!
To Next Page
Loading...
Need help?
General