190
OmniLink
Preferred Sites
From the MAIN MENU, press F4 thrice, F9 and then F6 to access this
screen.
A system key or FTR key must be present and the Coverage Type field must
be set to SmartZone and the OmniLink field must be set to Enabled on the
TRUNKING SYSTEM screen (F4/F4/F3) if this screen is to be accessed.
This screen is used to program the OmniLink Preferred Site Status
List. You may assign preference to up to 32 sites for each personality
associated with an OmniLink system.There are 4 different levels of
preference: NON-PREFERRED, LEAST-PREFERRED, PREFERRED,
ALWAYS-PREFERRED. The default ranking of a site is NON-PRE-
FERRED. Radio will attempt to use ALWAYS/PREFERRED sites as fre-
quently as possible and LEAST PREFERRED sites as infrequently as
possible.
Function Key Descriptions
F2 - ADD ITEM Adds a Preferred Site.
F4 - DELETE ITEM Deletes a Preferred Site.
You will be prompted for confirmation before the Site is actually
deleted.
Field Definitions
Ignored Site Resource Preference Use the UP/DOWN arrow keys to enable/disable this feature. If
enabled, the radio ignores site resources information (i.e., if the site
has ASTRO, 12 Kbit Secure, or Analog Clear repeaters) received in
Adjacent Control Channel OSWs.
If disabled, the radio will select sites based on this site resources
information. For example, if a radio has selected an ASTRO TG, it
will select sites with ASTRO repeaters over sites with only Analog
repeaters.
The factory default is Disabled.
DDDIF
MOTOROLA Radio Service Software Use UP/DOWN Arrows to Select Choice.
MCS Model:
..TRUNKING:PERS:OPT:PREFERRED SITES
OMNILINK PREFERRED SITES
------------------------
Ignore Site Resource Preference.....Disabled
# Site ID Prefer Status System ID
- ------- ------------- ---------
1 1 None 0001
2 2 Preferred 0001
3 3 Least 0001
4 1 Always 0001
5 2 None 0001
6 3 None 0001
7 1 None 0001
8 2 None 0001
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP ADD DELETE EXIT
ITEM ITEM
To Next Page
Loading...
Need help?
General