272
Upgrade Radio At the MAIN MENU, press F8 twice to access this screen.
You must have FLASHport software installed on your computer in order to
access this screen. This screen is used to upgrade your radio. Press Tab
to move to the desired field. Once a file is highlighted, press Enter to
select it and then F8 to upgrade the radio.
Note: The kit number of the selected file must match the kit number
on your FLASHkey. Otherwise, the RSS will not perform the
upgrade. Selecting a file that is not a FLASHport upgrade file will
result in a “CHECKSUM” or “INVALID FILE FORMAT” error.
Function Key Descriptions
F2 - CHANGE PATH Used to change the directory path in order to locate the directory
where the FLASHport upgrade files are located.
F6 - CHDIR UP Moves one level up the directory tree.
F7 - CHDIR DOWN Moves one level down the directory tree.
F8 - FLASH RADIO Used to upgrade the radio using the selected FLASHport file.
Note: The kit number of the selected file must match the kit number
on your FLASHkey. Otherwise, the RSS will not perform the
upgrade. Selecting a file that is not a FLASHport upgrade file will
result in a “CHECKSUM” or “INVALID FILE FORMAT” error.
Field Definitions
Software Path This field will default to the FLASH software path specified on the
CONFIGURE PATHS AND PORT screen (F9/F3).
HH
MOTOROLA Radio Service Software Press Enter to Select Upgrade File.
MCS Model: Press F8 to Upgrade the Radio.
MAIN:FLASHport:UPGRADE RADIO
Software Path: C:\MRSS\MCS\UPGRADE
DIRECTORY CONTENTS
------------------
mcsboot.enc
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP CHANGE CHDIR CHDIR FLASH EXIT
PATH UP DOWN RADIO