EasyManuals Logo

Motorola MCS 2000 User Manual

Motorola MCS 2000
323 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #134 background imageLoading...
Page #134 background image
128
Radio Wide Scan
Options
From the MAIN MENU, press F4, F3, F5 and then F8 to access this
screen.
This screen is used to customize the Channel Scan feature for specific
applications. Options and parameters that affect Radio wide,
Conventional and Trunking operations are available. Press Tab to
select the desired field, or press the desired function key (F1 - F10). If
a field is highlighted, press the UP/DOWN arrow keys to select the
desired choice or value.
Field Definitions
Nuisance Mode Delete Use the UP/DOWN arrow keys to enable/disable this feature. The
Nuisance Mode Delete setting allows the user to temporarily delete
from the scan list non-priority channels that are constantly busy. Such
activity may cause the radio to be constantly locked onto a channel. A
channel deleted using this option will remain deleted until scan is turned off.
When scan is turned on, all channels that were previously deleted will be
replaced.
The default is Enabled.
Priority Scan Alert Use the UP/DOWN arrow keys to enable/disable this feature. If this
option is enabled, the radio will audibly alert you in one of two ways
described below when it unmutes on a priority channel while
scanning:
One beep is generated for the priority talkgroup/subfleet in a
Trunked scan list or for the first priority channel in a
Conventional scan list.
Two beeps are generated for the second priority channel in a
Conventional scan list.
The default is Disabled.
DCEH
MOTOROLA Radio Service Software Use UP/DOWN Arrows to Select Choice.
MCS Model:
MAIN:CHANGE/VIEW:CONFIG:SCAN:OPTIONS
SCAN OPTIONS
------------
RADIO WIDE CONVENTIONAL
---------- ------------
Nuisance Mode Delete......Disabled Carrier Detect Required...Disabled
Priority Scan Alert.......Disabled Priority Chan Marking.....Disabled
Rx Hold Time (sec)...............3 Monitor Hold Time (sec)..........6
HUB Suspends Scan..........Enabled Voting Scan...............Disabled
Suspend All Scan.........Disabled
TRUNKING
--------
Failsoft Hold Time (sec).........6
System Search Time (sec).........1
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP EXIT

Table of Contents

Other manuals for Motorola MCS 2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Motorola MCS 2000 and is the answer not in the manual?

Motorola MCS 2000 Specifications

General IconGeneral
BrandMotorola
ModelMCS 2000
CategoryRadio
LanguageEnglish

Related product manuals